1. Surface treatment: the previous paint film is completely dry, and the oil stains on the paint film are removed. 2. Best fluorocarbon enamel Manufacturers china tell you that the temperature of it is 3°C higher than the dew point.

3. Best fluorocarbon enamel Manufacturers china tell you that the Coating method is brush, roller, and spray. 4. Thinner: Fluorocarbon paint thinner is adjusted to the appropriate viscosity for use. 5. Coating thickness: Mix evenly according to the ratio of A and B. After curing for 20 minutes, it is generally advisable to coat twice, and the dry film thickness is 80um.
6. Best fluorocarbon enamel Manufacturers china tells you that the Theoretical dosage is about 6-10㎡/kg (calculated as dry film 40um). 7. Overcoating interval: 16 hours at 25℃, the longest coating interval is unlimited. 8. The supporting paint for the front road: epoxy zinc-rich primer, epoxy primer, and epoxy micaceous iron intermediate paint.
Through the above introduction and analysis of the Best fluorocarbon enamel Manufacturers china introduces Construction Instructions for enamel, hope it helps you.