The characteristics of China fluorocarbon enamel on sales are tough paint film, high hardness, good decoration, excellent color retention, gloss retention, good oil resistance, solvent resistance, chemical resistance, good acid, and water resistance, excellent salt spray resistance, Super wea, etc.

Performance parameters of China fluorocarbon enamel on sales. 1. Color and appearance: In various colors, the paint film is smooth and smooth. 2. Non-volatile matter: ≥40%. 3. Adhesion: ≤Level 2. 4. Drying time : surface dry ≤1h; hard dry ≤24h (under 25℃). 5. Impact strength: ≥40kg•cm. 6. Hardness: ≥H. 7. Salt spray resistance (1000h): no foaming, no rusting, no falling off.
8. China fluorocarbon enamel on sales is Alkali resistance (50g/L, NaOH solution for 168h): no foaming, cracking, peeling, powder falling, no obvious distortion, or loss of light.9, acid resistance (50g/L, H2SO4 solution 168h): no foaming, cracking, peeling, powder falling, no obvious distortion, loss of light 10, water resistance; no foaming, cracking, peeling, powder falling, No obvious distortion and loss of light.
Through the above introduction and analysis of the characteristics of China fluorocarbon enamel on sales, hope it helps you.