News Center
News Center

Construction and storage of Electroplated CBN wheel on sales

  • Author:
  • Origin:
  • Time of issue:2023-05-03 16:54
  • Views:

Summary:(1) Before the coating of the Electroplated CBN wheel on sales, the surface of the base iron must be treated to Sa2.5 level. During the construction of the Electroplated CBN wheel on sales, it is strictly forbidden to bring in water, dust and oil to ensure the quality of painting.

Construction and storage of Electroplated CBN wheel on sales

(Summary description)(1) Before the coating of the Electroplated CBN wheel on sales, the surface of the base iron must be treated to Sa2.5 level. During the construction of the Electroplated CBN wheel on sales, it is strictly forbidden to bring in water, dust and oil to ensure the quality of painting.

Information

(1) Before the coating of the Electroplated CBN wheel on sales, the surface of the base iron must be treated to Sa2.5 level. During the construction of the Electroplated CBN wheel on sales, it is strictly forbidden to bring in water, dust and oil to ensure the quality of painting.

Electroplated CBN wheel on sales
(2) The coating ratio of the Electroplated CBN wheel on sales is component A (base material), component B (curing agent) = 20kg (20kg/barrel): 1 kg of curing agent (or according to the ratio notified by the manufacturer construction).
(3) The construction proportioning method of the Electroplated CBN wheel on sales is as follows: open the mouth of component A, add component B into component A, and stir well. Allow ageing for 30 minutes before painting.
(4) Electroplated CBN wheel on sales materials are required to be used as soon as they are prepared, and the proportioned paint must be used up within six hours. Unfinished materials should be kept sealed. Construction should be stopped on rainy days or when the relative humidity is greater than 75%. For parts with severe corrosive media, multiple coats are recommended.
Through the above introduction and analysis of Construction and storage of Electroplated CBN wheel on sales, hope it helps you.

Keyword:

Scan the QR code to read on your phone

language
中国
韩国
韩国
韩国
韩国
韩国

Contact Us

WeChat public account QR code

WeChat

Follow us

Follow us

Headquarter:Address: Room 520, No. 135 (Building 3), Huangyuan Road, Baiyun District, Guangzhou City, Guangdong Province

Production base:No. A-18, Huacai Chemical Paint City, Wengcheng Town, Wengyuan County, Shaoguan City, Guangdong Province

Guangzhou Wuyang Paint Co., Ltd.    粤ICP备14047330号       Powered by:www.300.cn  SEOLabel