1. Take effective measures to prevent direct contact between skin and eyes with Chlorinated rubber primer (such as using work clothes, gloves, goggles, face shields and applying protective oil, etc.). If the skin accidentally comes into contact with Chlorinated rubber primer products, please wash thoroughly with water and soap or an appropriate industrial cleaner; if the eyes are contaminated, please immediately rinse with water for at least 10 minutes and seek medical attention immediately.

2. During construction, it is recommended to wear a mask to avoid inhaling paint mist and harmful gases, especially in a poorly ventilated environment. Finally, please dispose of the used Chlorinated rubber primer paint bucket carefully so as not to pollute the environment. The paint is flammable and contains volatile flammable solvents, so it must be kept away from sparks and open flames.
3. It is strictly forbidden to smoke in the workplace with Chlorinated rubber primer, and effective measures should be taken to prevent the generation of sparks (such as using explosion-proof electrical equipment, preventing static electricity accumulation, avoiding metal impact, etc.).
4. The construction site of Chlorinated rubber primer should keep good ventilation as much as possible. To eliminate the explosion hazard during use, sufficient ventilation should be ensured to maintain the gas/air ratio not exceeding 10% of the lowest explosion limit, usually 200 cubic meters of ventilation per kilogram of solvent, which (related to the type of solvent) can be maintained—a working environment with a minimum explosion limit of 10 %.
Through the above introduction and analysis of the Safety measures for Chlorinated rubber primer, hope it helps you.