Web Search: Goods

Your present location:Home
  • Product name: Iron red epoxy thick anti-corrosion paint (two-component)
  • Product introduction: By epoxy resin, iron oxide red, corrosion-resistant pigments, additives and other composition of the
  • Applicable scope: Can be used in serious corrosive environment of harbor machinery, ships and land-based steel structu
  • Packing:
  • Effective storage period: 12 months

Product Features:
Can be made for the primer, the middle paint and decorative requirements of the topcoat; paint tough, wear, impact resistance, resistance to seawater and diesel; low temperature construction is good, winter curing agent can be as low as -10 ℃ construction.

Performance parameters:
1, color and appearance: gray or iron red, smooth and smooth film
2, non-volatile: ≥ 60%
3, drying time: dry surface ≤ 4 hours; hard dry ≤ 24 hours (25 ℃ conditions)
4, adhesion: 1 level
5, flexibility: ≤ 2mm
6, salt spray resistance (336h) does not blister, do not rust, do not fall off
7, salt water (3% NaCl, 96h): no blistering, no rust, do not fall off, allowing a slight discoloration, loss of light
8, thick coating: wet film thickness 400um no sagging

Construction instructions:
1, the surface treatment: the former film completely dry, in addition to the oil on the paint.
2, substrate temperature: higher than the dew point 3 ℃.
3, coating method: brush, roller, spray.
4, thinner: Epoxy paint thinner adjusted to the appropriate viscosity.
5, the thickness of the coating: according to the ratio of mixed B, the aging of 20 minutes, the general coated two times is appropriate, dry film thickness of 100um.
6, the theoretical amount: about 4.5 square meters / kg, (dry film 50um dollars).
7, overcoating interval: 25 ℃ 16 hours, the longest unlimited.
8, the former Road with paint: epoxy zinc-rich primer, epoxy with rust primer.
9, after supporting the use of paint: epoxy finish, acrylic polyurethane finish, fluorocarbon topcoat.

1, the construction site should have good ventilation facilities.
2, construction workers should wear a mask, glasses, gloves and other protective equipment, to avoid skin contact and inhalation paint mist, solvent.
3, the construction site is strictly prohibited smoking, isolated from all sources of fire.

Guangzhou Wuyang paint Limited by Share Ltd (producer)
Add: room 135, 3 building, 520 Huang Yuan Road, Baiyun District, Guangdong, Guangzhou
Tel:020-86297777      Fax:020-86296432

Guangzhou Wuyang paint (Wengyuan) Co., Ltd. (production)
Add:Guangdong Wengyuan County of Wengyuan city in Shaoguan Province town of Huacai chemical paint City No. A-18